Lichamp 10 Pack Green Painters Tape for DIY Enthusiasts

Lichamp Painter's Tape, Green, 1 Inch, 55 Yards per Roll, 10 Rolls Included (550 Total Yards) features excellent adhesion to a wide variety of surfaces, including smooth or lightly textured walls, trim, baseboards, tile, and glass. This multi-purpose green masking tape is suitable for indoor and outdoor use.

The green painter's tape provides good holding power to resist lifting or curling, with a crepe paper backing that offers conformability for easy handling and application. It is easily hand-tearable and resists slivering. The special backsize treatment ensures a controlled, easy-to-use unwind.

The tape's physical properties include an adhesion to steel of 25 oz./in. width (27 N/100 mm), a tensile strength of 19 lbs./in. width (333 N/100 mm), and an elongation at break of 8%. The tape thickness is 4.4 mils (0.11 mm), and it can withstand temperatures up to 200°F (93°C) for 30 minutes.

To use the Lichamp Painter's Tape effectively, follow these steps:

1. Clean the surface: Ensure the surface is clean, dry, and free of dust for proper adhesion.
2. Apply the tape: Lay the tape onto the surface, pressing it down as you go. Avoid stretching the tape, as this may cause it to lift or break.
3. Secure the tape: Firmly press the tape down with a smooth edge, such as a putty knife or credit card.
4. Allow the tape to set: Wait 30 to 60 minutes before painting.
5. Wait for the paint to dry: Remove the tape after the paint has dried to the touch, following the manufacturer's dry times.
6. Score and remove: Use a putty knife or razor blade to score along the edge of the tape, preventing paint from being pulled up or cracking along the paint line. Slowly lift the tape at a 45-degree angle, or 90 degrees if adhesive sticks to the surface.

With this green painter's tape, you'll achieve a sharp, clean paint line and a professional-looking finish, without worrying about any sticky residue or damage to the surfaces.

product information: